Friday, February 20, 2009

Washroom & Laundry Room Build - Part 2

Yesterday, we completed all the piping. It was more complicated that previously envisioned. The system had a silt trap that led off from the Weeping Tile from the perimeter of the house which led into another trap that led up to the floor drain. This trap was then connected to the sanitary side of the drain. The system was not done so well in the first place, but I was convinced by Mike that the Weeping Tile side needed to be loosely fit in order for the water table to seep into the system and eventually drain, thereby eliminating the possibility of a flood.

This morning I had to get a Fernco coupling from Home Depot to connect the 4" Clay Tile to the 4" ABS pipe that will come up to floor level. Having installed the ABS pipe, I then proceeded to fill in the hole and tamp it down. I will give it a couple of days to settle down, adding more sand as necessary.

The warren of pipes

Another angle

Filled in

Wednesday, February 18, 2009

Silent Post (or some images are worth a thousand words)

Shoes!

Clothes!!

More Clothes!!

Washroom & Laundry Room Build - Part 1

On the 13th I finally started work on the Washroom. Mike from Cardinal plumbing came over and we reviewed the plans. 

First we removed the Concrete sink that weighed over 300 pounds and installed a standpipe directly into the watertrap of the old sink. We then moved the faucets of the washer beyond the proposed wall line of the new washroom. 

Mike had kindly donated his sledehammer and pickaxe to do the breaking of the concrete and the digging.

On the 17th, I broke the sink apart and moved it outside for future disposal at the Brampton Civic Dump. I then broke the floor with the sledgehammer to get the trench started. We have a cleanout close to the basement drain into which we plan to run the drains from the toilet as well as the shower.

This morning while digging, I hit water. This was not suposed to happen as the cleanout should lead directly into the main drain and out to the street. Anyways, Mike will be here tomorrow to have a look and advise what is to be done next.

More to follow.

300 lb sink proved no match for 50 lb Hammer

Looking into where the washroom will be. The shower tray is standing in the corner. 

Same corner - different view

The entranceway will be replaced by a 32" door. The Laundry pair will fit under the ducts. 

Digging in the dirt!!!

Tuesday, February 17, 2009

Not Bad for a Day's Work!!!

Captain's Log - Star Date -313871.7393138002 
(That's February the 16th to you luddites)

Wow. By my own admission, I did accomplish a lot.

1. Built an High Definition antenna for free OTA (Over The Air) HD 
programming. The design was based on a Channel Master 4 Bay antenna

2. Painted Lynda's Walk in Closet. Color choice was 'Cloud' from 
Boomerang Paint. Boomerang makes a range of pre colored 
finishes made from recycling old paint. Sold by the Sally store, 
the cost is less than half of what regular paint costs at the big 
box stores.

3. Finally installed a Programmable Thermostat for the furnace. 
I had scored a Honeywell 5-1-1 Programmable Thermostat at 
one of the Garage Sales in summer for CAD 5.00. The cost of 
something similar is CAD 50.00 ++

4. Installed a Double Glazed window in the kitchen door which 
replaces a single pane of sheet glass that had no insulating 
properties whatsoever. The new pane was from the Flea Market
(Brand New) and cost me CAD 30.00. I had to enlarge the 
opening and it looks and feels amazing.

Thursday, February 5, 2009

Stuff that I've done Part V

Last spring Lynda had embarked on a project for her office. The project was essentially to scrapbook all of their events and have it displayed in their Foyer for all to peruse. Lynda needed a lectern to hold the book, but we were using Martha Stewart's largest Scrapbook which measures 18" high x 36" wide when open. All the lecterns that are commercially available were sized to hold a sheet of paper or at the most an open folder. This would no way do to hold open this album.

Add to that a non-existent budget and the job was mine. Like I ever had a choice!!!!!!!

I decided to make the unit out of project grade Pine for the base and the top surface. The legs are Newel Posts that are normally installed at the top and bottom of stair runs. I cut the Newels at an angle, cut radius' out of the bases as a design element, added a rest for the top plank, and rails for mounting. Dad did the final staining and it now sits at the DHL Brampton Call Centre.

The Newel Posts attached to the base.

Completely assembled and being tested for stability on a carpeted surface

From the Front

The Lectern holding the open Scrapbook

Sorry!! No Video

Apologies. I promised to post a video showing my Retro Squeezebox in action and the camera just would not cooperate. Will post as soon as I have it.

Sunday, January 25, 2009

Retro Radio Redux - Part 1.5

It's done. It's complete. It's amazing.

I plan on posting a video tomorrow of the unit in action.

I played uncompressed .wav files though the unit and it sounds simply amazing.

Remember that the speakers are old Creative FourPointSurrounds that I've had since 2002, so it could always be better. My original plan was to shoehorn my Rotel RC-931 integrated amplifier along with my Acoustic Energy speakers into the unit.

I took the path of least resistance in order to get the unit up and running. More mods will follow.

Some Errrr.. Plans

So we're months away from Summer. You would not believe that with the temperature hovering around -15 this morning. anyways, it's never too early to plan for Summer projects.

This summer is all about curb appeal. We plan on getting circular pavers under the Blue Spruce that adorns our front lawn, and then stain the 40 year old brick to match the paving stones. A dark grey. The slab outside the front door is not perfectly centered and I will extend the slab another 8 inches to the left. After the slab has cured, I will use rectangular slate tiles in a brick pattern. Then I will build a pergola above the front door to match the style of the pergola above the gate leading to the back yard. Finally I will make 12" high street numbers which will be painted white to match the pergola.

This is what I envision that t will look like. The brick color is not an accurate representation, but everything else is to scale. Drawing was done in Google Sketchup with a 1 day learning curve.

Monday, January 19, 2009

How Tubes Work

Probably the best explanation to date (Satirical) of how Tubes work. This is courtesy of www.unplggd.com. Had a nice laugh at this.

"We won't go into much detail as to how it works here- you can wiki it for more info. But briefly; a magical fairy flits about in the lightbulb-like structure using her little wand to make music louder. The manufacturer simply puts a little thimble of honey inside the tube to lure her in there in the first place. The fight against this heartless practice was one of the first crusades which brought PETA to the world stage, though, to be fair; fairies aren't animals."

Yeah Sure - And Conrad-Johnson amplifiers are made by Bill Conrad and Lew Johnson who are PhD Economists and once worked in Washington DC at the Federal Reserve. Oh. Hang on - They are!!!!!

Sunday, January 18, 2009

Little Misses Fixits!!!!!



While most people are content with getting their kids the latest greatest toys, I just hand them my garbage!!!!! This is the girls with my tools trying to further take apart the PCB that I removed from the old Luxman.

Yeah. I got Gearheads for kids......

The Script - The Man Who Can't be Moved


If you had your sound turned on, you would've caught the first few bars of 'The Man Who Can't Be Moved' by The Script.

Ever had a song so stuck in your head that you keep singing it all day??? That's this song!!!

The Script is a band out of Dublin, Ireland and are truly amazing. Their Studio Album titled The Script went multi platinum when it debuted last August.

Nice.

Media Center Build - Part 1


Building a Music Server has been one of the projects that I've wanted to do for the longest time. However, I needed that the Server not look like a computer as I wanted it to reside with my current Audio Components.

HTPC cases are all the rage right now, but the prices fall nowhere within my budget. Which is in the same range as President Bush's popularity. Zero.

I needed this built - and soon. I'm almost finished with the Turntable Monitor and the Squeezebox Mod. Both of these rely of having somewhere to read the information off.

I lucked out at the ReStore when I happened upon a very nicely maintained receiver from the Seventies. It looked about the right size to hold a PC Power Supply and a Motherboard with any daughter cards if and when required.

Turns out that the unit was a Luxman. Anyways, I plugged it in and it did not work. Could it have been repaired?? I plead the 5th on that.

I've so far gutted the unit, removed all of the PCB's desoldered the front panel controls from their PCB's as these will screw back onto the front panel as dummy units. The only things that will work on the front panel are of course the lights, which will light up the tuning dial, the Power button and reset button. The FM Stereo indicator will light up as the PC power indicator and the FM Signal Meter will act as the Hard Disk Drive activity indicator.

On the inside, I do not need anything powerful and will be installing one of my older machines running a scaled down version of Windows XP.

More on that soon.

Retro Radio Redux - Part 1

This is just me being totally impatient. The Radio is nowhere near complete, but all cosmetics are in place. After finding out that the cheapest roll of window tint was CAD 17.00, I decided to beg as a cheaper option.

Turns out that beggars are on to a good thing. The first two shops said that they were not in the habit of maintaining any of the scraps as they were generally of no use to anyone. The third shop invited me in, took an interest in what I was going to use the tint for and gave me a piece for free. This guy did not believe in throwing anything out. Probably was an Indian in a previous life.

After tinting the glass, I mounted the grille cloth (Parts Express # 261-810) and reassembled the entire unit together. I have yet to get some dummy potentiometers to hold the knobs in place. The knobs have no function as the Squeezebox has a remote controlled volume, with a built in Pre-Amp stage.

I mounted the Squeezebox in place just to see if it was visible through the tinted glass. Here are some pictures of what the unit will look like, sitting in my Living Room and pretending to be that what it is not.

Pictures were handheld and without flash as that would wash out the display.

In Screensaver mode - Faux Analogue VU meters

Now Playing - From my Music Library on my Laptop

Searching for Internet Radio - Bosnia anyone????

A Station in Amsterdam

Railroad Radio in Vancouver

Sunday, January 11, 2009

Retro Squeezebox Mod

In 2007, I posted my latest aquisition, a Murphy Radio from the 60's or 70's. See here.

In the summer of 2008, Jita, Lynda's good friend and my Logitech Godess gave me a Slim Devices Squeezebox 3. Only this week, I plugged it in and set the unit up. It is an amazing device which gives you access to all you music on your PC as well as a host of Internet Stations. It's only drawback being that it needs to be connected to a Stereo. This has since been addressed by the Squeezebox Boom. But I digress.

I now plan to integrate the Squeezebox 3 with a pair of Amplified Creative Speakers into the carcass of the now restored Murphy Radio set.

It's a Work In Progress and I will be posting pictures soon.


Sunday, January 4, 2009

Turntable Hack

For the longest time, I've wanted to digitize my audio, allowing access to my 600+ (and growing) collection of CDs. At one point I even considered an iPod, with a DLO dock. That would have limited me to encoding my music in the lossless AAC format instead of the more preferred (by audiophiles) WAV or FLAC formats. I finally settled down to eventually building myself a Media Server, but was still stumped by what I was to use as a monitor to make my selections. I could have used the TV, but that would've meant keeping the TV on, and that is something that we try to keep off as much as possible.

Then it struck me. I currently have a Turntable that I like to listen to, so why not pair it up with yet another turntable (DJ style) but instead of the platter I would replace it with a monitor while keeping the tonearm and dust cover as a nod to it's heritage. 

The Donor Turntable is an old Sansui SR-222 Belt Drive that I scored from the Value Village for CAD 7.00. I felt quite bad about ripping it apart... for about 5 seconds.

But by now I would've lost you all. So why don't I just illustrate the same in pictures.

I have yet to build the Media Server, and will do so in the coming months.


With the Dust Cover open. Running Album Player. I have yet to paint the monitor Bezel Flat Black


The Tone Arm installed just for looks 


From the side. The Sansui Badge intact


With the Dust Cover closed

Pimp My Dining Table

Having spent Christmas with the D'Souza's (Chaves, Baptistas, Gonsalves'), Lynda wanted to do something with the Fernandes side as well. We decided on dinner on the 28th. We wanted this to be a sit down dinner but our current table can only seat 6 comfortably, and we were to have 12 persons at the table.

I got myself down to the Depot on the 28th morning and bought 3 lengths of 2 x 12 x 12'.

Unfortunately even with all of the precautionary flashing lights tied to the 2' that was protruding out the rear of the van, I was pulled over by Peel's Finest to be informed that it was illegal to drive with the rear door wide open. Having explained myself and what I was up to, I was then offered an escort home. What an experience to be escorted home by the POPO, flashing lights and all...

Anyways, not much to explain on the construction. I used the existing legs of our dining table which is of the 'Farmhouse' style. I replaced the central lower support with a 2 x 6 x 8' which meant that the table essentially cantilevered 2' at each end.

The table was an absolute B***h to turn over, but Lynda assisted and all was well.

It came out quite well and comfortably sat the 12 of us with ample elbow room for everyone.

The Planks laid out. They are heavy

The braces screwed in and the central lower support being prepped for cutting

The legs attached to the planks and the central support braced in place

Voila!! 12' Farmhouse table for CAD 54 and change.

And here's the table all decorated and set. My basement ceiling was removed and is still a work in progress!!

Monday, December 22, 2008

Sledding at Mt. Chinguacousy

This afternoon I took the girls sledding at Mt. Chinguacousy. As Alpine as that may sound, the mountain (hill???) is probably man made for the pure purpose of winter recreational sports.

The girls got new smaller sleds with a slightly elevated seating area and just the two runners contacting the surface. I factored this into my calculations when buying the sled and estimated that they would be fast.

Boy were they fast. They were the fastest on the slope, beating all the other sleds by a wide margin. And I already have plans on pimping them out for more speed. 

An hour and a half later and my feet were freezing, but the girls were still not willing to get off the slopes.

Here are some pics taken at the end of the day.



Sunday, December 7, 2008

Skating at Gage Park

Gage Park officially opened it's outdoor Skating Rink on the 2nd of December with the Winterlights Celebration and we were down there to celebrate after collecting Lynda from work.

It was cold and we were all bundled up. I did not carry my skate and it was a good thing that I did not. No use in seeing a grown man bumbling along on the ice amidst groups of well honed skaters. The girls enjoyed themselves so much that I had to take them to the Park yesterday as well. In the midst of a blizzard!!!!

It's all fun though. And Layla is actually managing to skate without holding the rails.

Sorry for the poor quality of the pictures, but it was dark and all I had was the P&S and no tripod.

Oh. We did get to see the Zamboni doing 180's on the ice. That in itself was worth being off the ice while the Zamboni resurfaced the rink.



Friday, December 5, 2008

Aaliyah's Floor - Complete!!

Finally finished Aaliyah's floor including the 6" baseboards. Everything was fitted and painted by Friday evening.

Status is now 100% complete.

Aaliyah moved in by Friday night.

This is the area where the major repair was done to  close up the hole in the floor

The floor as seen from the door

Tuesday, December 2, 2008

Brampton ReStore

Just thought that I'd give a 'shout-out' to my favourite store of all time. The Brampton ReStore is simply amazing and only reinforces that old saying that one man's junk is another man's treasure.

Over the past year, I have got deals that would have otherwise cost 10-20 times as much if I had to buy retail. Best part of this is that all proceeds from the store go to providing housing for the under privileged.

If you're ever in Brampton, stop in. They're on the junction of Glidden & Rutherford.

Thursday, November 27, 2008

First Snow

On the 19th, we had our first taste of snow. It was amazing and the girls totally enjoyed being out and playing in the snow. They were out for more than and hour and had to be dragged in.

Our second winter and it's still as amazing as the first.

Unfortunately, the snow has since all melted due to above normal temperatures and we have Environment Canada warning us of a warmer winter this year.

Tsk Tsk. That will never do. 





Aaliyah's Room Update

As visible on the Project Tracker to the side, I have updated Aaliyah's Floor to 60% done. As of yesterday, I had mudded and taped the ceiling, primed and painted the walls and ceiling to match the original colors of the room. 

As of this morning I had the Square Buff Sander in and sanded the entire floor with 60 / 80 / 120 grit paper. Sanding the floor was not as painful as lugging the unit in and out of the car as well as up and down the short flight of stairs from our main level to the bedrooms.

As of this evening I was down on my knees, finish sanding the edges with my palm sander and found myself covered in a fine film of Oak sawdust. Pictures of the floor will follow when completed.

Here is the room when we started to what the walls, ceiling & floors look like without the wallpaper and the holes.

(Bad Bulkhead!!!)

(Bad Idea!!!)

(Bad!!!)
Related Posts with Thumbnails